Blog Post #27- Sensing cognitive multitasking for a brain-based adaptive user interface

Reference

 Authors:   
    Erin Treacy Solovey     Tufts University, Medford, Massachusetts, USA
    Francine Lalooses     Tufts University, Medford, Massachusetts, USA
    Krysta Chauncey     Tufts University, Medford, Massachusetts, USA
    Douglas Weaver     Tufts University, Medford, Massachusetts, USA
    Margarita Parasi     Tufts University, Medford, Massachusetts, USA
    Matthias Scheutz     Tufts University, Medford, Massachusetts, USA
    Angelo Sassaroli     Tufts University, Medford, Massachusetts, USA
    Sergio Fantini     Tufts University, Medford, Massachusetts, USA
    Paul Schermerhorn     Indiana University, Bloomington, Indiana, USA
    Audrey Girouard     Queen's University, Kingston, Ontario, Canada
    Robert J.K. Jacob     Tufts University, Medford, Massachusetts, USA

Published In:
    CHI '11 Proceedings of the 2011 annual conference on Human factors in computing systems

Summary

Hypothesis:
The authors of this paper set out to accomplish a few things with their paper:

1. Prove that fNIRS is a reliable mean of measuring various brain states as compared to fMRI
2. Show that fNIRS can be used in different study models
3. Build a proof of concept system that has a user be able to control a robot while a fNIRS based system can control an adaptive interface to manage distractions

Testing the Hypothesis:
The authors performed quite a few experiments in order to fully test their hypothesis.  They first constructed a simple test to determine if fNIR can be used to tell the differences in the brain between various states of multi-tasking.  This experiment had twelve participants press a certain key depending on the order of capital and lower case letters in a series of words.

The next two experiments they performed were somewhat related to each other.  They both involved a human controlling a robot to perform the task  of sorting rocks.  The user then had to press certain buttons based on certain characteristics of the rock samples.

Results of the Hypothesis:
The conclusion from the studies was that using response time alone, delay, branching, and dual task are statistically impossible to differentiate, however, it was considerable easy by comparing the levels of oxygenated blood in various regions of the brain. 


Discussion

In my opinion, the authors definitely accomplished what they set out to do.  I am very confident about this because they were especially thorough in their case study part of their paper.  Most papers if they involve some sort of experiment, maybe have one example with a few participants.  In this paper, however, the authors performed three separate studies each with over twelve people. As far as relevancy goes?  As our smart phones become smarter the problem of multi-tasking will only increase.  It is very important to look into ways to increase human efficiency while multi-tasking takes place and to determine if it possible to reduce distractions in today's society.

Blog Post #24-Gesture avatar: a technique for operating mobile user interfaces using gestures

References

Authors:

Hao Lü     University of Washington, Seattle, Washington, USA

Yang Li     Google Research, Mountain View, California, USA

 

Published In:

CHI '11 Proceedings of the 2011 annual conference on Human factors in computing systems

Summary

Hypothesis:

Modern smart phones utilize touch based GUI's in order for users to navigate programs.  This leads to several problems, the biggest two being: the "fat-finger problem," i.e. the target UI is too small for fingers to accurately press, and the "occlusion problem," i.e. the finger that will activate the control blocks vision of it while the user is pressing it.  The authors hypothesis that the system they developed which they called, "Gesture Avatar," will perform better than normal input methods and better than the "Shift" system.

Testing the Hypothesis:

In order to test their hypothesis the authors created the system they outlined early in the paper with Java on the Android 2.2 with additional systems for image processing written in C++.  They obtained twelve students, eight of them males and four of them females, from an unnamed company.  The study they then performed had users learn both the Shift and Gesture Avatar system.  Half of the users learned the Shift first and the other half learned the Gesture Avatar system first.  This was done to prevent a user bias in favor of the system they learned first.  The participants were then given a specific task to complete.  They had to target a specific area on the screen using both systems.  The target area varied in many ways throughout the experiment and the performance times of the users were measured.  Halfway through completing this task, the users had to move from a sitting position to a treadmill where they completed the other half while walking on said treadmill.

Hypothesis Results:

The results of the experiment were ran through a ANOVA in order to eliminate any variance within the results.  After this, the data showed that the Shift system was faster when the size of the target was 20px but slower at 10px and there were no differences when it was 15px.  This falls in line with the author's hypothesis that Gesture Avatar would be better at smaller sizes but slower for larger ones.   Also, Gesture Avatar showed no difference in response times while the user was walking and while he was sitting.  On the other hand, Shift's time went up significantly while the user was moving.

Discussion

In my opinion the authors had a well defined hypothesis that was easy to test and evaluate.  After reading the data from their experiment, it obviously fell in line with their hypothesis and proved that the Gesture Avatar system is at least worth investigating further.  The system the authors created seems to me to be a very unique and promising method of user input.  Forever I have struggled with the problems they addressed with Gesture Avatar (moving the caret while typing, selecting tiny hyperlinks).  The authors could have had a more extensive experiment, i.e. a larger number of participants, more diverse participants, and more tests for them to perform.  Also, I think having the users complete some of the tasks while on a treadmill is pointless because it cannot be generalized to normal walking.  While on a treadmill you don't have to pay attention to where you are going or what is in front of you, only the pace at which you walk.  A move apt experiment would to navigate an obstacle course or have the user walk on a semi-busy sidewalk (if that is allowed within experimentation rules).

Blog Post #17- Biofeedback Game Design

Reference

Authors:  
Lennart Erik Nacke     University of Saskatchewan, Saskatoon, Saskatchewan, Canada
Michael Kalyn     University of Saskatchewan, Saskatoon, Saskatchewan, Canada
Calvin Lough     University of Saskatchewan, Saskatoon, Saskatchewan, Canada
Regan Lee Mandryk     University of Saskatchewan, Saskatoon, Saskatchewan, Canada

Published In:
CHI '11 Proceedings of the 2011 annual conference on Human factors in computing systems University of Saskatchewan, Saskatoon, Saskatchewan, Canada

Summary

The authors of the paper, "Biofeedback Game Design" wish to approach the design of electronic games using "physiological" input methods. By physiological input methods, they are referring to things such as: heart rate (HR) monitors and galvanic skin response (GSR) monitors.  Traditional methods of combining video games with these forms of inputs, end up with simple games that use HR or GSR sensors as the primary form of input.  According to the authors, this is a faulty method of game design because these types of sensors are "passive;" the user cannot actively control these responses, thus leading to either boring game play, or simple relaxation based games.  In order to correct this discrepancy, the authors created a simple game that utilizes what they call direct physiological inputs.  Examples of these kinds of inputs are: muscle flexation, breathing patterns, eye gaze, change of temperature (a la blowing hot air).  These are all types of inputs that can be directly controlled by the user. The authors then spent about one to two pages explaining the game they created and how various physiological sensors interact with the game itself.  To test the use of physiological inputs the authors created three different games, two with different kinds of sensors and one without any to act as a control.  The study used ten subject (seven of which were male) who had varying degrees of experience with video games and novel forms of input (i.e. the Nintendo Wii or Rockband Guitar system).  The results of the study showed the users all preferred the two games with novel inputs rather than the control game.  Furthermore, when asked which novel inputs they enjoyed the most, the direct senors got much more votes than the passive sensors did all across the board.


Discussion

Right off the bat I can say the authors did not have nearly enough participants in their study.  Ten is such a low number, it cannot capture the general audience of video games or eliminate the outliers who for some reason or other dislike novel forms on input in video games.  Also, as mentioned later in the paper, all of the participants are "causal gamers" (aka, really, really bad players).  Four of the participants even admitted to only playing video games a few times per year.  Given the limited number of subjects I would think the authors would have stuck with at least players who play once a week rather than people who never game at all.  Other than this, I found the concepts in the paper agreeable.  When discussing the difference between direct and passive forms of physiological input, I  agreed that direct inputs seemed more natural and rewarding to the player (even without having played the game they developed).  I could definitely see the eye tracking make its way into future games, but the others I am not sure of.  I am sure someone will eventually try it, but whether it is successful remains to be seen.

Blog Post #13- Combining multiple depth cameras and projectors for interactions on, above and between surfaces

Reference

Authors:
Andrew D. Wilson     Microsoft Research, Redmond, WA, USA
Hrvoje Benko     Microsoft Research, Redmond, WA, USA


Published In:
UIST '10 Proceedings of the 23nd annual ACM symposium on User interface software and technology

Summary

This paper is another of the technical possibilities type of article.  Instead of creating a hypothesis and setting out to test it, they are testing whether a particular type of technology is reasonable to construct and use.  For this particular paper the authors are testing a prototype they call, "LightSpace."  LightSpace is an interactive room powered by depth cameras.  These cameras are able to project onto any surface at a very high rate.  Thus allowing such interactions as: a projection of an image onto a user's hand as he walks or any flat surface in the room can be used as a projection board.  The system itself handles all projecting and combines the entire worldspace into one reference grid so developers do not have to worry with implementation details such as which camera is projecting what.  The idea of projecting onto the human body in this paper is called, "Simulated Surfaces."  With this, ListSpace keeps a vague mesh of the human bodies within the room, and much like the Microsoft Kinetic, tracks this mesh and allows for easy projection like a menu unto the user's hand or a graphic that the user wants to move from surface to surface. 

Overall, the paper was primarily to showcase the various methods of implementation the authors used in constructing their LightSpace room.  They also showed how one can project a 3D imagine unto a 2D surface which can then be analyzed by standard image processing techniques.


Discussion

I think the authors accomplished what they set out to do at the beginning of this book.  They wanted to outline their methodology of creating LightSpace and I feel like they did a good job of explaining the various implementation details.  Moving on, LightSpace is a very interesting piece of technology.  Frankly, many people would be interested in this because of their perceptions of the future.  Whether it is from books or movies, many people envision computers as an interactive unit like the one portrayed in this paper. An interesting point made by the authors is that it would be completely feasible to emulate the same functionality of a Microsoft Surface onto any flat surface.  What would be even more interesting and probably useful would be to allow interaction between the program behind the projectors AND a Microsoft Surface.  Since the Surface has such a high resolution compared to the projectors, users might be more comfortable exploring the interactions between the Surface and another Surface or just a board mounted on the wall like in the paper.

"Gang Leader for a Day" Review

I went into the book a little sceptical. I had already taken two sociology classes and had not had good experiences with the field.  So when I read an except by the author were he claims he is a "rogue sociologist," I was nervous.  After finished the book, I am very relieved.  He, unlike most sociologist, focused on the actual data or situations of the people rather than turning it into a "bash the opposite political party."  

 Another interesting point about this book is the location.  It takes place in Chicago so I cannot truly be surprised by this level of corruption.  It has long been a running joke in popular culture to make fun of Chicagoan politics, but in reality, it isn't funny.  It actually a serious matter.  Corruption is always present in any form of government, but the level that exists in Chicago is unacceptably high for a city in the USA.

Near the end, I was kind of disappointed by the book.  Sudhir felt for some reason that he had to distance himself from JT for no reason.  Even going as far as to say he was never his friend.  Now, I don't understand how you could hang around someone for seven years, go through some much, and basically make your career off of his life and then not even consider him a "friend." He didn't have to say that he was his bestiest-best-friend of all time, but it is not hard to call someone a friend, and considering all the things JT did for Sudhir, it is just downright cruel to not even give him the label of friend.

Blog Post #11- Multitoe: high-precision interaction with back-projected floors based on high-resolution multi-touch input

Reference Information

Authors:
Thomas Augsten     Hasso Plattner Institute, Potsdam, Germany
Konstantin Kaefer     Hasso Plattner Institute, Potsdam, Germany
René Meusel     Hasso Plattner Institute, Potsdam, Germany
Caroline Fetzer     Hasso Plattner Institute, Potsdam, Germany
Dorian Kanitz     Hasso Plattner Institute, Potsdam, Germany
Thomas Stoff     Hasso Plattner Institute, Potsdam, Germany
Torsten Becker     Hasso Plattner Institute, Potsdam, Germany
Christian Holz     Hasso Plattner Institute, Potsdam, Germany
Patrick Baudisch     Hasso Plattner Institute, Potsdam, Germany

Published In:
UIST '10 Proceedings of the 23nd annual ACM symposium on User interface software and technology

Summary

The authors of this paper have set out to, in their words, "explore the design decisions," of large high-resolution input devices.  Specifically, they explore a system that uses pressure sensing devices to detect minute foot presses on a floor.  The system they used is called FTIR.  It is able, through the use of a series of pressure sensing devices, to detect any number of pressure points in the system.  A big concern of the paper is whether the authors can eliminate unwanted inputs.  Since the input system is the floor itself, the users have to stand on it and walk across it to do anything.  They are concerned with eliminating these unwanted foot presses and focus only on deliberate foot presses.  In order to determine the best method of disregarding unwanted foot presses and highlight intended foot presses, the group created a focus group based on thirty volunteers.  The authors created two simulation buttons on the ground and asked the users to show how they would activate one while ignoring the other.  After monitoring how they behaved, the authors verbally interviewed the volunteers in order to understand how and why they acted.  Through this study, the authors concluded the best method was to make the users tap, double tap, jump, or stomp on a button to cause its activation.  Another few studies were performed, each with a different task in mind, examples include: which part of the foot should cause activation, and which point should be considered the "hotspot" or the primary method of activating buttons.

Hypothesis:
There isn't so much as a hypothesis, as there is a question of usability.  Is it possible to create a large multi-input floor that can detect such small differences in foot presses that it could tell users apart by the differences of their shoe's soles.  Also the question of whether it is feasible to create a system that users can walk on and activate controls comfortably.  Ultimately the authors collected enough data from user study groups to form the beginnings of ideas for user input.  They have not yet constructed the actual room with the floor based input device, but they have a prototype and detailed construction plans.

Discussion

As always with these discussion, I must be careful to comment on the technical merit of the paper and not just focus on the feasibility/usefulness of the ideas presented.  So I will only mention this once: I really don't see the point of this.  It has to be  implemented into the construction of the room, so home use it out of the window.  In commercial use, an actual keyboard will probably be better 95% of the time, I can only see this delegated to cheap, gimmicky games or other advertising ploys.  Also as a side note, I have played a LOT of DDR. I mean a lot, and I never, ever liked using the pad to navigate through the menus.  Many times my friends or I would just pick up the controller or use the keyboard to make selections and leave the dance pad for the actual game.  Even then, playing in arcades was much different than playing at home because the pad the arcade was always worn down from too many users putting too much pressure on them, which is a problem I see for this device.

That aside, I think this technology is pretty interesting.  The ability to differentiate users based on their shoe is very intriguing.  Typing with your feet seems pretty frustrating through, aside from the length of time it would take, the motions sound like it would wear on you.  I think they were spot on with the methods of telling input between just walking, though if I were them, I would not force users to jump to do a simple task like bring up a context menu.  This seems ill-suited to older users or less athletic users.

HCI Initial Write-up

Prior Perceptions


To integrate myself, I plan to take the route of the typical new member.  I will show up at the meeting and express my interest to join and also mention my complete lack of experience in this area.  I suspect that only half of their new members join like this though.  The other half probably have been fencing for a while in high school and might know the people in the club through major fencing tournaments.  Regardless, as a newbie in the club and in the field of fencing, I hope the group accepts me and 'shows me the ropes' instead of being annoyed by an unskilled person who tags along with the group.

I think to fully understand a group, one must experience said group without the spectre of being an outsider hanging over them the entire time.  Thus, I plan to actually join the group and take the route of a new member instead of introducing myself as having a project and asking to observe them.  By being in the inside, I hope I can gain an acute understand of this group, something that would be very difficult as a foreign observer.   Honestly, I think the best time and way to bring up the project would just to say that I have to write a few reports over "groups" for a class and let them imagine the rest.  They will probably assume it is for a sociology or psychology class and think nothing of it.  The knowledge that I had this assignment for a while and that I specifically sought out and joined this club solely for this class would probably be harmful to my membership and friendship in this group.  And truthfully, I wanted to join this club anyway.  I took the opportunity to complete this assignment and get involved in something that seemed interesting to me and in all honestly, I probably would have joined this club even without this assignment.


As far as prior perceptions that I have with this group... I expect that it will mostly be males.  They will probably all be in what most people would call "nerdy" majors.  I expect a lot of the people in the club will have been doing this since before they came to A&M.  As a result, I assume many will be from upper middle class backgrounds.  I am not sure how they will treat new members.  The possibility that they are critical and cold towards newer members is there, though they also might not be so elitist and instead welcome new blood with open arms.  Of these two possibilities, I cannot know which to be true until I actually attend the meeting. 



Initial Results


The initial interaction in the group was extremely satisfying.  Not only did I have tons of fun, but I was able to gather a ton of good information.  The first thing I noticed my initial expectations about the gender gap was not as wide as I originally envisioned.  At the beginning of the meeting, there were about 12 people total, with 4 females.  The atmosphere of the group seemed laid back, they were very happy to have new members so that was heartening.  The first thing we did once everyone was ready, was warm up exercises.  This activity kind of solidified my initial expectations about the kind of members present in this group; that is, everyone struggled with the exercises,  basically: this was not a group of hardcore athletes.  After the exercises, during the stretches, we all introduced ourselves so the new members (Trevor and me) could get to know everyone and we could introduce ourselves without being awkward.  At this point, another assumption was proven true, most of these guys were in either engineering or scientific fields.  Next we did footwork drills and since I was new and did not know how to do them, one of the members was nice enough to take me aside and go over them one on one. After these were complete, the rest of the members gathered their equipment and began sparring.  The same member who went over the footwork drills with me, continued her kindness and took me to the armory and showed me where all of the equipment is and what items I needed.  We got back to the practice room and several people helped me suit up and I was immediately thrust into a sparring lane.  The dominate theory of learning in this group seemed to be trial by fire.  Armed with a foil and almost no knowledge, I was put to the test against one of the experienced members.  At first I was nervous and worried, but these feelings soon faded and I enjoyed myself.  Like all good sports, the best way to learn is to do.  You don't sit in a classroom or have someone explain how to catch a ball or make a free throw, you just go out there and do it. We spent the rest of the four hour meeting sparring with different members, getting tips and pointers, and generally having fun. 

Overall, I felt really welcomed into the group and I expect this to be a very good group to complete my ethography on.

Blog #6: TurKit

Reference

Authors:
Greg Little     Massachusettes Institute of Technology, Cambridge, MA, USA
Lydia B. Chilton     University of Washington, Seattle, WA, USA
Max Goldman     Massachusettes Institute of Technology, Cambridge, MA, USA
Robert C. Miller     Massachusettes Institute of Technology, Cambridge, MA, USA


Published in:
UIST '10 Proceedings of the 23nd annual ACM symposium on User interface software and technology

Summary


This paper is mainly about a concept called, "Mechanical Turk" or (MTurk); a concept where computer programs use humans to do complex mechanical computations that are easy for humans.  Examples of this include labelling pictures, reviewing things, and rating things.  All of these tasks are either impossible or very difficult to program into a computer but very simple for humans to do.  The authors list the features that their program implements: an API for using MTurk with standard programming techniques, a web GUI for managing MTurk scripts, and a new model of computer programming called, "crash and re-run" programming.  This  new model of programming takes into account the long delay in waiting for human input.  A common example of MTurk the authors cite as a success is the online encyclopaedia: Wikipedia.  This website builds instead completely from user input and interaction. 

The script the authors implement to aid in MTurk programming is entitled, "TurKit Script."  It is based on the popular scripting language Javascript but is lightly modified to allow for crash and re-run programming and other MTurk features.  Although TurKit is single threaded, it has functions to mimic multi-threaded programs.  This is useful because MTurk is inherently  a multi-threaded concept since many people will be entering in input at the same time.


Discussion

Yet again, I am completely fascinated about the topic in this paper.  The ability to correctly identify images or write acturate reviews of certain items is extremely difficult in terms of computer programming.  Farming out difficult work like this to humans who can do this kind of work easily is very smart.  I already see this kind of technique used in the ever popular "recaptcha" and I could foresee this being used elsewhere also.

Blog Paper Reading #4: Gestalt

References

Authors:
Kayur Patel     University of Washington, Seattle, WA, USA
Naomi Bancroft     University of Washington, Seattle, WA, USA
Steven M. Drucker     Microsoft Research, Seattle, WA, USA
James Fogarty     University of Washington, Seattle, WA, USA
Andrew J. Ko     University of Washington, Seattle, WA, USA
James Landay     University of Washington, Seattle, WA, USA

Published in:
UIST '10 Proceedings of the 23nd annual ACM symposium on User interface software and technology

Summary

This paper is about the development environment: "Gestalt."  Gestalt is a program designed to aid in 'machine learning.'  Machine learning is the process of designing algorithms that focus on capturing behavioural patterns through the processing of data. The authors recognize the difference between the two tasks of implementing and analyzing data pipelines in their paper and explain how Gestalt differentiates between the two and allows users to switch back and forth between these tasks easily.

The authors explain how many different kinds of problems can be solved using similar general methods with machine learning and Gestalt.  Their primary examples are determining whether a movie review is negative or positive by analyzing the vocabulary and grammar of the review and recognizing hand and pen gestures.

For the authors, they conclude that the best method to help develops utilize machine learning is by exposing the entire data pipeline.  They reference other machine learning tools that either attempt to simplify or expedite machine learning by hiding some steps in the pipeline from the users, but the authors conclude that this only hinders the developer and thus, they choose to make Gestalt show the entire process.

The rest of the paper goes into detail about Gestalt itself and how it present its data to the users. 


Discussion

 I thought this paper was actually pretty interesting.  At first, the concept of using pure data to drive programming seemed foreign and odd to me, but after reading about the uses I began to see the benefits of such a system.  Their overall goal and research method seemed sound to me and I really didn't question any of it.  Machine learning seems like such a great idea, I just think it needs to be applied only in certain areas.

Blog - Paper Reading #3: Pen + touch = new tools

Reference:


Authors:
Ken Hinckley         Microsoft Research, Redmond, WA, USA
Koji Yatani         Microsoft Research & University of Toronto, Toronto, ON, Canada
Michel Pahud         Microsoft Research, Redmond, WA, USA
Nicole Coddington     Microsoft, Redmond, WA, USA
Jenny Rodenhouse     Microsoft, Redmond, WA, USA
Andy Wilson         Microsoft Research, Redmond, WA, USA
Hrvoje Benko         Microsoft Research, Redmond, WA, USA
Bill Buxton         Microsoft Research, Redmond, WA, USA

Published in:
UIST '10 Proceedings of the 23nd annual ACM symposium on User interface software and technology

Summary:


This paper considers the applications and benefits of using what the authors call "simultaneous pen+touch" technology which is an interface that allows users to manipulate it via a touch pen and their fingers.  They say that most other technologies focus on one of these input methods and ignores or disallows the other.  The primary medium they use to discuss this is the Microsoft Surface because like mentioned before, most devices don't allow both pen and touch based input.  The authors state it is not their intent to recreate paper and pen onto the Microsoft Surface, but instead, to use the natural movements and gestures inherit in paper and pen input as a base for creating an easy to use.  The test users of this system found many of the input gestures and methods very logical and natural to use.  The only issues they ran into were the specially designed designed gesture set which had to be explained to them.


Discussion:


As with the last article, this technology is fascinating and I wish the Microsoft Surface was more accessible to the general public.  The problem with it, at least to me, is many of the applications are remakes of cheap real life games or could be done with paper and pen.  Hopefully this research will help make the Surface easier to use and open up the range of applications that could be developed for it.

Blog - Paper Reading #2: Hands-on math

Reference:

Authors:
Robert Zeleznik     Brown University, Providence, RI, USA
Andrew Bragdon         Brown University, Providence, RI, USA
Ferdi Adeputra         Brown University, Providence, RI, USA
Hsu-Sheng Ko         Brown University, Providence, RI, USA

Published in:
UIST '10 Proceedings of the 23nd annual ACM symposium on User interface software and technology

Summary:

This paper is written by Mircosoft researchers who are attempting to determine if a Computer Algebra System (CAS) program can integrated into a multi-touch based interface using the Mircosoft Surface. The authors review similar technology and explain why their is new and/or different.  Previous works in the same area, according to the authors, do not utilize multi-touch technology combined with a light pen.  They claim that using these technologies together allows the user a familiar and natural input method in their program.

The authors spend several pages detailing the various hand gestures and interface options available to users of their program.  For instance, page creation is handled using an extremely natural gesture of sliding two fingers over the edge of the screen from the outside to the inside, mimicking the action of pulling a new sheet of paper unto the desktop.  According to their results, almost all experimental users were able to figure this out without outside assistance.  Another noteworthy interface option is the ability to "fold" pieces of the on screen paper.  Much like a computer programming IDE, users can pinch a section of the paper and that particular section is hidden until the user calls it back. 

The user feedback in the last portion of their paper seemed pretty optimistic.  Most of their interface was discoverable without too much help and the features that were not, were clear to the users after appropriate explanation.  The only widespread criticism of the program was the lack of high level functionality it allowed.  All of the users desired a deeper program in terms of the level of math it helped with. 


Discussion:


The first thing that I cannot shake from my mind is the fact that the authors used the word "cool" multiple times in their article.  Although it was a quotation from the feedback of the test users, it still cracked me up everytime I read it.  Aside from that, this technology is very "cool." Reading this paper made me want to buy a Microsoft Surface solely for the ability to use program like this (until I looked up the price :/).  Overall, I was interested in how the authors decided to use each gesture and input method and as an outsider, I could see how each is natural and a good method to use.

Blog Post #1- Imaginary Interfaces

Reference Information

Title:
Imaginary interfaces: spatial interaction with empty hands and without visual feedback

Authors:
Sean Gustafson     Hasso Plattner Institute, Potsdam, Germany
Daniel Bierwirth     Hasso Plattner Institute, Potsdam, Germany
Patrick Baudisch     Hasso Plattner Institute, Potsdam, Germany                            
   
   
   
Summary

This paper is addressed the topic of literally "Imaginary interfaces."  What they mean by this is a device that captures hand gestures and motions but provides no feedback in the form of screens, projectors, or anything else.  This is a unique concept because most other devices have either a projector or use an extremely limited vocabulary of allowed hand gestures to signal the computer.  For example, you might have ten different pre-programmed commands to be able to signal certain actions such as opening a door.  But in this paper, the authors go further and suggest a device that allows unlimited options and hand gestures.  They propose that the device allow users to set a 2D coordinate plane with one hand then use their other hand to draw on this imaginary screen.  The have evidence that the average user's attention span is long enough to remember the location of the things they draw allowing them to use such a device.  The Authors also go into detail about the advantages of such a system.  Among these are the fact that the user does not need to carry a device allowing them to free up space on their person and in their hands and the recent trend in the use of hand gestures as the primary method of maniuplating interfaces.


Discussion

I am not really sure what to put in my discussion section this time... The idea seems interesting but I am very sceptical about the practical uses.  Especially with the interference of random movements, can such a system actually be implemented? Even if it is, people LIKE the ability to see what they are manipulating.  I don't think we can turn people away from popular past time of staring at their tiny cell phone screens at all times in public.

Book Reading #1: Chinese Room

Reference Information

Minds, Brains, and Programs

by John Searle

Department of Philosophy 

University of California

Summary

John Searle hypothesized an experiment he called "The Chinese Room."  It follows as thus, if a programmer created an AI that was so advanced, it could pass the Turing test.  Also, what if this program were given the task to receive input in the form of Chinese words and then give logical output also in Chinese, does this AI "understand" Chinese?  He comes to his conclusion that it does not "understand" Chinese via another proposed situation.  If he went put into a locked room with a Chinese dictionary and a native Chinese speaker was slipping a piece of paper with Chinese on it under the door, and he looked it up and responded, would you conclude he speaks Chinese?  He says no, and therefore, the computer does not "understand" Chinese because it is doing the same thing as he is, just faster.

Discussion

I would conclude that Searle's conclusions are false.  I would use the same reasoning he did to show that yes, this computer does in fact "understand" Chinese (maybe not very well, but at least to some degree). He says that since he is having to look up the words to be able to communicate he doesn't speak Chinese and since the computer is doing just that, but at a faster rate, it too doesn't "understand" Chinese, but is this not how a human brain works?  For the native speaker, he hears the word, then his brain "looks up" what it means and various pieces of information about the word so he can understand its meaning.  If a computer could do this at the same speed then what is the difference between a computer doing it or the human brain doing it?

Blog - Paper Reading #0: "On Computers"

Reference Information

"On Plants"

by Aristotle*

Edited by Jonathon Barnes  

*indicates that there is no direct evidence he wrote it

• 
  

Summary


Aristotle started his essay by describing the popular arguments for whether plants have a soul or not.  He referenced other philosophiser's opinions on the matter and compared and contrasted them to his own.  He then went into great depth about the differences between many kinds of plants.  In this particular discussion he went into great detail about the fruits of plants; what separates them, which kind grow where and on what plant, whether certain juices from certain fruits were drinkable or not, whether you could use the juices in other ways, etc.  He performed a similar examination of the bark and branches of the plants.  The next few pages were spent examining the habitat of different plants and making a general comparison between them all.  He made a cursory sweep of how a plant grows and in what kinds of environments, then he went into more detail about the different locations like Greece, Egypt, etcAristotle started his essay by describing the popular arguments for whether plants have a soul or not.  He referenced other philosophiser's opinions on the matter and compared and contrasted them to his own.  He then went into great depth about the differences between many kinds of plants.  In this particular discussion he went into great detail about the fruits of plants; what separates them, which kind grow where and on what plant, whether certain juices from certain fruits were drinkable or not, whether you could use the juices in other ways, etc.  He performed a similar examination of the bark and branches of the plants.  The next few pages were spent examining the habitat of different plants and making a general comparison between them all.  He made a cursory sweep of how a plant grows and in what kinds of environments, then he went into more detail about the different locations like Greece, Egypt, etc that plants grow in. He mentioned an odd topic that I am not familiar with.  He made some claims about plant seeds growing into different species of plant depending on the location of where they are grown.  I am not experienced in agriculture but I have never heard anything like this before.  


Book two is somewhat more of the same.  He goes into more details about the physiology of plants.  He has half of a page where he discusses the cause of earthquakes.  He concludes that earthquakes are caused by air trapped underneath the earth that builds up to a point where it breaks free.  This leads him into his next topic which is the 'rarity' of plants and material.  Basically, a stone will sink because it has no 'rarity' or air inside of it while a piece of wood will because it has a large 'rarity,' or in other words, it is porous.  One last topic of note is the causation of deserts.  He concludes that normal soil is turned into a sandy desert when it stops raining and the sun drys it all out.     




Discussion

I hate to say this, but this paper was not intriguing to me at all.  While I can appreciate it for what it is and who it was written by, without motivate (a grade), I would definitely never have read this.  As far as significance goes?  I am honestly not sure.  It might be one of the earliest definitive works on plant  physiology and it definitely gives modern scientists a great view into the popular science and thought at the time.   Other than that, the actual ideas proposed in this work seem few and far between.  If so much of the essay wasn't devoted to "plant x grows in location y and has fruit z" then I could better understand why it is considered noteworthy.  

Blog #-1 My Introduction

(1) afunderburgh@hotmail.com

(2) 4th Year Senior

(3) To be honest, this fulfills one of the computer science class, but it also sounded extremely interesting.  While I was signing up for classes at the end of last semester, none of them drew my attention as much as this class did.  After only a day I can already tell that it will be worth all of the work required by us.

(4) I think I bring a very unique perspective to this class.  I was born in Dallas, Texas but it seems my entire life I have been exposed to different groups that lie outside of my comfort zone.  By this I mean in my high school back at home I was in the ethnic minority since my school mostly consisted of Hispanics or Blacks.  Right at the end of high school I started dating a Filipino (or I guess more correctly: a Filipina) girl and am still with her after three years.  Experiences with her family have been.... interesting.  In college I met a large group of Indian students who traveled to Austin every weekend and since Kim, my girlfriend goes to UT, I hitched a ride with them every week to visit her.  I learned a lot about myself and other people during those trips.  We were good friends but sometimes we got into disagreements over our different world views and at the end I fear we only strengthened our own opinions.  At UT, by pure chance, Kim and I somehow joined the Vietnamese Students Association and grew to be close friends with many of those members.  After our first year of college, many of the people I got rides to Austin with stopped going so through another series of interesting circumstances I ended up meeting a 30-year old female Chinese student who gave me rides until last semester when she graduated.  To top all of this off, this last summer, I traveled to Morocco where I lived with a host family for six weeks while I furthered my education in the Arabic language.  

So I am confident in saying that I have experiences with groups outside of the normal stereotypical Texan. (Which I have had plenty btw)

(5) Working.

(6) In all honesty.... something "social."  Some mobile device that interfaces with the world better, yadda yadda.  What I want to be the next big thing, is technology that more interaction with our brains i.e. you can send visual signals directly to the occipital lobe instead of dealing with expensive and low quality monitors or screens. 

(7) Larry Page so I can be the initial investor in Google :-)

(8) inb4 toms. In seriousiness, I like tennis shoes and they are the only kind of shoes I wear.  Sandals aren't as comfortable to me.  

(9) If I could instantly become fluent any language I would definitely choose Mandarin.  Since I am already fluent in English and have had a year and a half in Arabic, if I were fluent in Mandarin I would be able to speak with over at least 90% of the world's population.  I considered taking a class in Mandarin while at A&M but I never have the time each semester.  Also the task of mastering such a language is too daunting.  I prefer my languages with alphabets and less focus on tones.

(10) See question three.  Other than that: I am learning Arabic, I am addicted to League of Legends, and I like working on computer science projects.  That is about it.